Concrete Patios in Kennewick, WA & the Tri-Cities

Broom finish is the most common — affordable, slip-resistant, and timeless. Smooth or trowel finishes look cleaner but can get slick when wet. Stamped, colored, and exposed-aggregate finishes add visual character and resale value. We will walk you through real samples so you see how each finish handles sun and water.

Standard residential patios are 4 inches thick over a compacted base. If you plan to support a hot tub, pizza oven, or outdoor kitchen we pour 5–6 inches with rebar in those zones so the slab supports the point load without cracking.

Yes. We pour stamped patios in slate, flagstone, brick, and wood-plank patterns with integral color and accent release. Stamped work is sealed and typically re-sealed every 2–3 years to keep color vibrant under Tri-Cities sun.

For a small lounge area plan 12×12 ft (144 sq ft). For a dining patio that fits a 6-person table plus chairs plan 16×16 ft (256 sq ft). Larger entertaining layouts run 18–20 ft on a side. We will sketch it onto your lot during the estimate.

All concrete eventually develops hairline cracks — the goal is controlling where they happen. We cut control joints at the right depth and spacing, reinforce with rebar or fiber as needed, and use a proper subgrade. Done correctly, a patio holds up for decades without structural cracking.